Sanyo PLC- XW 60

XGA

2000 ANSI

1.6 KG

RM 3.199 ONLY

Bright Image
With the compact, light-weight body, the projector provides a brightness of 2000 Lumens. This allows for clear projection even in a small meeting space or conference room.

Light Weight and Compact
Industry’s smallest and lightest* body (264.0 (W) x 55.0 (H) x 188.0 (D) mm and 1.6 kg) offers great portability. (not including protruding parts)
*as of October 28, 2008 for XGA LCD Projector


Optical 1.2x Zoom Lens with Short Focal Length
PLC-XW60 is equipped with a zoom lens that allows screen size adjustment. The optical zoom hardly deteriorates the image quality. The short-focus type lens allows large screen image projections with a short throw distance. PLC-XW60 enables 100- inch screen projection at the shortest distance of 2.7 m

Auto Vertical Keystone Correction
The PLC-XW60 and PLC-XW60 automatically compensates for keystone picture distortion.
NOTE: Correction range varies depending on operation settings such as lens shift ratio, lens zoom magnification and so on. On-screen image size after correction is smaller than that of original. The correction range is up to 20 degrees.

Screen Color Mode
In addition to the black board (green) mode, the PLC-XW65 and PLC-XW60 provides four color (red, blue, green, yellow) board modes, enabling easy projection* without using an ordinary screen.* The projected image color may be different from input signal color.

Easy Setup Function
PLC-XW60 provides "Auto Setup Function" that corrects keystone shape distortion by searching for an input signal and detecting projector incline, reducing setup time.Furthermore, the "Screen Guidance Function" allows projector set up according to the displayed guidance. This function provides beginning users an easy guide to projection.

Lamp Replacement On Top Cabinet
Lamp replacement is performed by accessing the top cabinet. During installation on a ceiling, the lamp can be replaced with the projector hung on the ceiling.

On-Start Function
The power turns on as soon as you connect the power cord. No need to press any buttons on the remote control or projector.

Power-Off and Go
No need to wait for the projector to cool down. The power cord can be disconnected right after your presentation.

Terminals
The PLC-XW65 and PLC-XW60 have two D-sub input terminals. One of these can be switched and used as a monitor output terminal.